Cycling Training
TEKFIT provides 4 riding scenarios: 3D virtual reality, AR real road scene, floating window and Youtube mode; it uses motion sensors to capture motion postures to know the movements when riding performance. TEKFIT gives feedback during the process: knee joint motion trajectory, RPM, speed, pedaling center of gravity, etc.; when the action is incorrect, it will give instant voice prompts and training correction guidance to optimize exercise efficiency and reduce sports injuries.
Using the motion sensors to capture knee motion trajectory,sport data and knee motion trajectory will be displayed in real time, and will provide visualized and voice feedback,easy to understand whether your posture is correct or incorrect and adjust immediately. The knee motion trajectory will be presented in ellipse,the larger the area, the greater the shaking, means the knee joint is less stable while riding.
PCO, is the location of the pressure on the pedal where you apply force.if the pressure center is too outward or inward,it may cause unnecessary power loss and present lower libs joint overrotate.
TEKFIT is connected to " IMAS IMOTEK Motion Analysis Services " to provide exercise data feedback, and exercise data can be easily obtained through communication software LINE.
The user wears motion sensors on the calves of both feet, with a spinning bike or bicycle training platform, and uses the [TEKFIT] interactive training software.
DC 5V 230mA
20mA
2.4 GHz ISM Band Operation
10 m（Indoor）
9 DoF
230mAh
45 minutes
10 hours
W56.8 x D48 x H16.5 mm
24 g
DC5V 40mA
2.4 GHz ISM Band Operation
10 m（Indoor）
W46.6 x D28.5 x H10.2 mm
8 g
Windows 7
Intel Core i3 or AMD Ryzen 3
4 GB
1 GB
1920x1080
USB Port*2
